background image

USE & CARE

With proper care and under normal use, Sunnydaze egg chairs and stands will last for years. It is important to 

follow basic use & care tips to prolong the life of your egg chair and stand.

• SAFE USE:

 Do not use this chair for swinging, bouncing, jumping, twisting, or other excessive movements; 

doing so may cause serious injury, including, but not limited to, the stand tipping over. Do not use the stand 

without the safety strap; this strap helps keep the chair safely in place while getting in and out of the chair.

• CHILDREN:

 Supervise children at all times. Do not allow children to play on or sleep in hanging chairs.

• INSPECTION:

 Ensure the stand is assembled correctly, the hardware is securely tightened, and the safety 

strap is buckled before each use.

• CLEANING:

 Use a soft cloth, warm water and mild detergent to wipe down the stand. Dry the stand after 

cleaning to prevent rust. Cushions may be wiped down with a damp cloth. For tougher stains, use mild 

detergent and a soft cloth to gently scrub. Rinse thoroughly and air-dry cushions to prevent mold and mildew 

growth.

• SCRATCHES:

 The powder coating on the stand is tough and durable but, even under normal use, some 

scratching is inevitable. To avoid excessive rust, wipe these areas as needed to remove moisture.

• STORAGE:

 Store the chair and stand indoors during winter and inclement weather. Cool, dry locations are 

best to help prevent damage. Exposure to moisture may cause the stand to rust and could cause mold and 

mildew growth on the cushions and chair. Prolonged exposure to sunlight will cause the cushions, chair, and 

stand to fade.

TROUBLESHOOTING

• If the stand feels unstable, make sure it is on a level surface and the feet are correctly and evenly distributed.

• If the stand is making noise when in use, check to make sure all hardware is tightened. Some noise created 

by the hanging hardware is normal.

WARNING: 

Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether 

direct or indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or 

neglect of this product.

Page 3 / 4 

10/2019

JYF13103-set

Any modification or failure to follow the recommended care will void the product warranty.

SAFETY STATEMENTS & WARNINGS

•  Weight limit: 265 pounds

•  Sunnydaze Egg Chair with Stand is not a swing. Do not swing, bounce, jump, twist, or spin 

in the chair. 

•  Use care when getting in and out of the chair. When in use, the chair should remain inside 

the base area at all times. A diagram of the base area is shown on the right.

•  This product is intended to be used by one person at a time.

•  The chair must be used with the provided safety strap attached to the chair and stand as 

shown in Step 6.

•  Chair Stand must be used with all provided parts. Install all parts in accordance with the 

assembly instructions and inspect the stand before use.

•  Ensure all hardware is securely installed and tightened before each use.

•  When securing the chair to the stand, only loop the safety strap around the frame of the chair. Never loop the safety strap 

around the rattan material of the chair as it will break the rattan material which may cause it to unravel.

•  Always inspect the stand and hardware for damage before each use.

•  Do not allow children to use this product without adult supervision.

Содержание AJ-741

Страница 1: ...ents on a soft clean surface to avoid scratching damaging the finish No Tools included Qty X Small Hex Key 1 Y Large Hex Key 1 Z Spanner 1 10 2019 JYF13103 set Ensure all parts are accounted for before disposing of packaging WARNING CHOKING HAZARD This item contains small parts that can be swallowed Keep children away during assembly No Parts Qty A Base Back 1 B Base Front 1 C Straight Pole 1 D Cu...

Страница 2: ...e using Large Hex Key Y and Spanner Z Place Large Hex Nut Cap O over the lock nut Slide Curved Pole D onto Straight Pole C and align the holes Secure the poles using Bolt K Washer L and Lock Nut N Tighten the hardware using Large Hex Key Y and Spanner Z Place Large Hex Nut Cap O over the lock nut J Carefully snap Foot J evenly onto the stand base as shown Step 2 Step 3 Step 4 A B C D ASSEMBLY Page...

Страница 3: ...ved Pole D Insert Extension Spring S through the bottom of Pin R Hang the egg chair onto Extension Spring S Step 6 Step 7 R S NOTE Only loop the strap around the frame of the chair as shown Align Chair Top 1 and Chair Bottom 2 and secure them using Bolt G Washers H and Lock Nut P Place Small Hex Nut Cap Q over the lock nut Step 5 D G H H P Q Z X Tie Cushions 3 onto the frame of the egg chair NOTE ...

Страница 4: ...shions chair and stand to fade TROUBLESHOOTING If the stand feels unstable make sure it is on a level surface and the feet are correctly and evenly distributed If the stand is making noise when in use check to make sure all hardware is tightened Some noise created by the hanging hardware is normal WARNING Manufacturer and seller expressly disclaim any and all liability from personal injury propert...

Отзывы: