Sunny SF-TD7884, Руководство пользователя

Страница: 10 / 21

9
MAINTENANCE GUIDE
General cleaning will help to prolong the life and improve the performance of your treadmill. Keep
the unit clean and maintained by dusting the components on a regular basis. Cleaning the two
exposed sides of the
Running Belt (No. 13) will prevent dust from accumulating underneath. Keep
your running shoes clean so that dirt from your shoes does not wear the Running Board (No. 10)
and Running Belt (No. 13) . Clean the surface of the Running Belt (No. 13) using a clean damp
cloth. Keep liquids away from electrical parts and Running Belt (No. 13) .
ADJUSTING THE RUNNING BELT
Place the treadmill on level ground and set it at 3-5 MPH to check and see if the Running Belt (No.
13) drifts from the center. Adjust the Running Belt (No. 13) according to instructions below with
Allen Wrench (No. 76).
1. If the Running Belt (No. 13) drifts to
the right, turn right adjusting bolt ¼ turn
clockwise , then turn the left adjusting
bolt ¼ turn counter-clockwise . If the
Running Belt (No. 13) does not move,
repeat this step until it centers. Refer to
image A.
2. If the Running Belt (No. 13) drifts to
the left, turn the left adjusting bolt ¼ turn
clockwise , then turn the right adjusting
bolt ¼ turn counter-clockwise . If the
Running Belt (No. 13) does not move,
repeat this step until it centers. Refer to
image B.
3. Over time, the Running Belt (No.
13) will loosen. To tighten the Running
Belt (No. 13) , turn both the left & right
adjusting bolts one full turn clockwise .
Check the tension of the Running
Belt (No. 13) . Continue this process
until Running Belt (No. 13) is at the
correct tension. Make sure to adjust
both sides equally to ensure even
alignment. Refer to image C.