- 6 -
Step 4: Hydraulic cylinders assembly
1. Attach the fixed ends of the hydraulic cylinder to the U-brackets (35) on the left and
right hand side frames (3+4) using Bolts (23), Flat washers (8) and Nylon nuts
(15).Screw on the nut (15)until the self-locking part of the nut engages on the thread of
the screw (23) and the hydraulic cylinder is not blocked.
2. The position of the Hydraulic cylinder (22) on each Rowing handlebar (24 & 25) can be
adjusted by slackening and re-tightening the Adjustable knob (31). The position
governs the tension/Resistance in the cylinders. The higher the Adjustment bracket (30)
on the rowing handlebar the Greater the tension resistance.
Step 5: Checks
1. Please make sure the Rowing Machine is properly assembled and all the bolts are
tightened.
2. When everything is in order, familiarize yourself with the machine at a low resistance
setting and make your individual adjustments.
Note:
Please keep the tool set and the instructions in a safe place as these may be required for
repairs or spare parts becoming necessary later.
