8
MAINTENANCE & ADJUSTMENT GUIDE
33
33
4
ADJUSTING THE SEAT
Turn the
Adjustment Knob (No. 33)
counter-clockwise
to
release
Seat Post (No. 4)
and then slide the
Seat Post (No.
4)
forward or backward to the desired position. Secure the
Seat
Post (No. 4)
in place by turning the
Adjustment Knob (No.
33) clockwise
until tightened.
MOVING THE RECUMBENT BIKE
To move the recumbent bike, hold the
Rear Stabilizer (No. 68)
and tilt the recumbent bike until the
End Caps (No. 31)
located
on the front stabilizer touch the ground. With the
End Caps
(No. 31)
on the ground, you can transport the recumbent bike
to the desired location with ease.
ADJUSTING THE BALANCE
To achieve a smooth and comfortable ride, you must ensure
that the recumbent bike is stabled and secured. If you notice
the recumbent bike is unbalanced during use, adjust the
End
Caps (No. 25)
located on the
Rear Stabilizer (No. 68)
until the
recumbent
bike becomes levelled with the floor surface.
2
23
ADJUSTING THE TENSION
Adjust the tension by rotating the
Tension Control Knob (No.
23)
clockwise
to increase the level of resistance. Rotate the
Tension Control Knob (No. 23)
counter-clockwise
to
decrease the level of resistance.
Tension levels are set at Level 1 being the lowest and Level 8
being the highest.
CLEANING
The recumbent bike can be cleaned with a soft, clean, damp cloth. Do not use abrasives or solvents
on plastic parts. Please wipe your perspiration off the recumbent bike after each use. Be careful not
get excessive moisture on the computer display panel as this might cause electrical hazards or
electronics to fail.
Please keep the recumbent bike, especially the computer, out of direct sunlight to prevent screen
damage.
Please inspect all assembly bolts and pedals on the recumbent bike for proper tightness every week.
STORAGE
Store the recumbent bike in a clean and dry environment, away from children.
Содержание SF-RB4876
Страница 14: ...13...
