Sunny SF-E3862, Руководство пользователя

Страница: 14 / 23

13
IMPORTANT ELECTRICAL INFORMATION
WARNING:
This elliptical trainer requires a power source of 1 amp (100-240V) in order to
properly operate. For your safety, as well as the safety of others, please verify that the power
source is correct before plugging in the equipment. Any power source above or below this level
could cause significant damage to the equipment and or user.
OPERATING INSTRUCTIONS
Plug the adaptor into the elliptical trainer and into the outlet.
The computer will turn on.
The computer will turn off if there is no activity for 4 minutes. Press
any key on the computer to turn it on again.
NOTE: You can still use the elliptical trainer when it is not plugged in. However, the
computer will not be working, and you cannot adjust the resistance level or use any of the functions.
KEY FUNCTIONS:
KEY FUNCTION
START/STOP Start and pause workouts
Start body fat measurement
Hold for 3 seconds to reset all function values to zero
DOWN Lower the resistance level during workout.
Decrease value of selected parameter
UP Increase the resistance level during workout.
Increase value of selected parameter
ENTER To input the value or mode
RECOVERY Enter Recovery function when computer displays the heart rate value.
Recovery displays F1-F6
F1 is poor recovery heart rate
F6 is excellent recovery heart rate
MODE During workout, switch display from RPM to SPEED, ODO to DIST and
WATT to CALORIES
WORKOUT SELECTION:
After turning the computer on by plugging in the adaptor or if already plugged in, pressing any
button on the computer, use the UP or DOWN button to make a selection. Then press ENTER
button to choose the desired mode.