12
Handle Bar Assembly
STEP 10
Then attach the Right Handle
Bar (29R) onto the Rear U-
Frame by using 2 Hex Head
Bolts (10) and 1 Hex Head Bolt
(43), 6 Washers (13) and 3
Nylon Nuts (15) as shown on
diagram. Then insert the Ball
Pin (33).
STEP 9
Attach the Left Handle Bar
(29L) and Metal Block Sleeve
(32) onto the Rear U-Frame
(2) by using 1 Hex Head Bolt
(10) and 1 Hex Head Bolt (43),
4 Washers (13) and 2 Nylon
Nuts (15) as shown on
diagram. (Hex Head Bolt (44)
has been pre-assembled onto
the Metal Block Sleeve (32) in
Step 4. Make sure it is fully
tightened.)
Note:
The Right Handle Bar has
holes for setting the degree of
inversion you want. Please insert
the Incline Adjustment Bolt (19) to
select your desired degree of
inversion. See page 15 for details.
32
13
13
29L
2