4
ASSEMBLY INSTRUCTIONS
STEP 3:
Pull
Wire (No. 1c)
out from the
Main Frame (No. 10)
and connect it to the
Connecting
Wire (No. 1b)
.
Attach the
Bottom Stand Post (No. 7)
to the
Main Frame (No. 10)
using 4
Washers
(No. 4)
and 4
Bolts (No. 8)
and tighten and secure with
Allen Wrench (A)
.
STEP 4:
Pull the
Connecting Wire (No. 1b)
from the
Bottom Stand Post (No. 7)
. Take the wire
from the
Meter (No. 1a)
and insert it through the small hole located on the top end of
the
Top Stand Post (No. 5)
as shown in the picture on the left side below.
Next, carefully insert the
Meter Wire (1a)
through the
Top Stand Post (5)
and connect
it to the
Connecting Wire (1b)
atop of the
Bottom Stand Post (7)
as shown in the
picture on the right side below.
Содержание TWIST STEPPER WITH HANDLEBAR
Страница 3: ...2 EXPLODED DRAWING PARTS LIST ...
