3
ASSEMBLY INSTRUCTIONS
STEP 1:
Remove the
Main Frame (No. 10)
from the box. Lift both pedals all the way up and
secure the pulley in place by slightly pushing forward. Next, hook the cable to the
groove of
Pulley (No. 11)
and push the pedals back down. Secure the
Adjustment
Knob (No. 9)
onto the
Main Frame (No. 10)
by tightening.
NOTE:
The
Adjustment Knob (No. 9)
is used to increase and decrease tension and
stepping height.
STEP 2:
Disconnect the
Connecting Wire (No. 1b)
from the
Meter Wire (No. 1a)
. Attach the
twist tie provided to the
Connecting Wire (No. 1b)
. With the
Connecting Wire (1b)
attached, use the twist tie to insert the
Connecting Wire (No. 1b)
through the
Bottom
Stand Post (No. 7)
.
Содержание TWIST STEPPER WITH HANDLEBAR
Страница 3: ...2 EXPLODED DRAWING PARTS LIST ...