19
5.
1, 3, 5 MPH (QUICK SPEED BUTTONS):
These buttons are preset to the speeds of 1,
3, 5 MPH for convenience.
LUBRICATION REMINDER
Your treadmill needs lubrication maintenance every 188 miles. The system will release a
beeping sound every 10 seconds and display an “OIL” icon on your LCD display to
remind you when it’s time. Please read the LUBRICATING THE TREADMILL on Page
13 to learn the proper steps to lubricating your machine. Apply the lubricating oil to the
middle of the running deck on both sides. After application, press and hold the STOP
button for 3 seconds to clear the reminder.
TREADMILL FUNCTIONS
SAFETY LOCK FUNCTION:
Removing the
Safety Key (D06)
from the computer console while the treadmill is running
will cause it to stop immediately. Once the treadmill reaches a full stop, the window
display of the computer will show “- - -“ and the buzzer will beep 3 times. To start the
treadmill again, insert the magnet end of the
Safety Key (D06)
into the computer
console and press the START button.
POWER SAVE FUNCTION:
When the treadmill has been idle for 10 minutes, it will enter Power Saving Mode. While
the treadmill is in this mode, the window display of the computer will be turned off. To turn
it back on, press any button.
POWER ON:
Flick the power switch to this symbol to turn on the treadmill.
POWER OFF:
Flick the power switch to this symbol to turn the treadmill off at anytime. This includes
during exercise.
SAFETY NOTE:
1. We recommend that you maintain a slow speed at the beginning of a session and hold
the handrails until you have become familiar with the treadmill.
2.
Insert the magnet end of the
Safety Key (D06)
into the computer console and attach the
opposite end (containing the safety clip on it) to your clothing before starting your
workout. To end your workout, press the STOP button or remove the
Safety Key (D06)
and the treadmill will stop immediately.
Содержание SF-T7643
Страница 5: ...4 EXPLODED DRAWING...
