11
TROUBLESHOOTING
PROBLEM
CAUSE
CORRECTION
Base is unstable
There is an object under
the Main Frame of the
treadmill or the ground
isn’t level.
Remove the object
Move the treadmill to level
ground
The Lock Knob is loose
Tighten the Lock Knob
Noise from moving parts
Hardware; nuts bolts or
screws are loose
Inspect
hardware
and
tighten.
Running Belt and Board
are not lubricated
Lubricate Running Belt and
Board see (Pg. 10)
Running belt not centered
Running belt tension not
Proper on the left or right
sides of the running board
Adjust the Allen Bolts; refer
to Maintenance (Pg. 9)
Centering
the
Running
Belt.
The Monitor screen does
not display clearly.
The batteries are low
Replace the batteries with
new ones
The Monitor doesn’t work
at all.
One
of
the
following
sensor
wires
isn’t
connected correctly. The
Sensor
Wire
(No.46)
Lower Sensor Wire (No.
22A) or Upper Sensor
Wire (No. 22B)
Check the connections of
the sensor wires, make
sure connects are proper
The Batteries are dead
Replace with new batteries
Содержание SF-T1407M
Страница 3: ...2 EXPLODED DRAWING ...