background image

 

 

MAINTENANCE 

 
 

 
IMPORTANT:  

Safe and effective use can only be achieved if the equipment is assembled, maintained 
and  used  properly.  It  is  your  responsibility  to  ensure  that  the  equipment  is  maintained 
regularly. Any components found to be worn and/or damaged should be replaced before 
continuing  use  of  the  equipment.  Equipment  should  only  be  used  and  stored  indoors, 
prolonged exposure to weathering and changes in temperature and humidity may have 
a severe impact on electrical components and moving parts of the machine.  
 

 
Daily Maintenance: 
-

Clean and remove sweat and moisture after each use. 

-

Perform inspection of all nuts and bolts associated with moving parts of the equipment, 

tighten as required. 

-

Check  the  mobility  of  moving  parts  and  components  on  the  equipment,  lubricate  if 

required. 

-

Clean  plastic  parts  of  the  equipment  using  a  damp  cloth,  clean  metal  parts  of  the 

equipment using a dry cloth. Do not use cleaning products to clean the equipment. 
 

Weekly Maintenance: 
-

Thoroughly  inspect  the  parts  of  the  equipment;  nuts,  bolts,  screws  and  moving  parts 

such  as  the  slide  collar,  seat/back  pad,  support  bar,  etc.  Tighten  or  replace  parts  as 
required. 
 

Monthly Maintenance: 
-

Inspect the frame and inner working components for wear and tear as well as damage, 

maintenance or replace as required.  
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Содержание SF-BH6506











Отзывы: