ADJUSTING THE HEIGHT
Loosen and pull out the
[seat height]
Adjustment Knob (No. 13)
to adjust the height of the
saddle. You may also slide the seat forward or backwards by loosening and pulling out the
[seat]
Adjustment Knob (No. 13)
on the
Seat Slider (No. 16)
. You may adjust the height of
the handlebar by using the [handlebar]
Adjustment Knob (No. 13)
. When making
adjustments, you will see a limit on the saddle post, seat slider and handlebar post. Do
NOT lift the posts passed this mark. Always check the
Adjustment Knobs (No. 13)
to
ensure that they are fully secure when you finish making an adjustment.
MOVING THE BIKE
To move the bike, first ensure that the handlebar is properly secured. If the handlebar is
loose, tighten the
Adjustment Knob (No. 13)
to secure it. Next, stand at the front of the
bike so that you’re directly in front of the handlebar. Firmly grasp and hold each side of the
handlebar, place one foot on the front stabilizer and tilt the bike towards you until the
transportation wheels on the front stabilizer touch the ground. With the wheels on the
ground, you can transport the bike to the desired location with ease.
ADJUSTING THE ANGLE OF SEAT
Use
Spanner (No. 91)
to unscrew the nut under the saddle. Adjust the saddle to the
desired angle and reinstall the nut. Check the nut periodically to ensure that it is tight and
secure. Use the
Spanner (No. 91)
to tighten when necessary.
