Sunny Health & Fitness SF-B1411, Руководство пользователя

Страница: 7 / 9

6
COMPUTER INSTRUCTION
KEY FUNCTIONS:
MODE: Press the “RED” MODE button to select one of the
functions (Time, Speed, ODO, Distance, Calorie, and Scan).
OPERATION PROCEDURES:
1. AUTO ON/OFF:
If you begin to cycle on the machine or if the MODE button is
pressed on the monitor, the monitor will become active and shall remain active until you
either stop cycling or press the MODE button on the monitor. Monitor has an auto-
shutoff feature after 4 minutes of inactivity.
2. RESET:
The monitor can be reset by pressing and holding the MODE button for three seconds
or by removing the batteries; this will completely reset all of the monitor function settings
back to zero.
3. MODE:
To select the LOCK MODE setting, press the MODE key until the pointer on the function
you wish to select begins to blink (once locked only the selected function will be
displayed).
4. FUNCTIONS:
TIME: Keeps track of the total time of each session.
SPEED: Displays current speed.
ODO (ODOMETER) : Displays the total accumulated distance.
DISTANCE : Displays the distance covered for each session.
CALORIES: Displays the amount of calories burned during each session.
SCAN:
Press the
MODE
button until the indicator arrow points to
SCAN
, once on
SCAN the indicator arrow will continue to flash indicating that SCAN mode is active.
Afterwards, it will automatically scan through each function in sequence.
Battery: This monitor uses two AAA batteries. If the display appears improper or
becomes difficult to read please try installing new batteries before attempting to contact.
1. Locate and remove the
battery cover from the back
side of the monitor.
2. Install (2) AAA batteries.
3. Replace the battery
cover.
4. Connect the computer
wires as shown in the
picture to the right.