5
STEP: 3
Insert the
Handle Bar (No. 1)
into the holes located on the front end of the
Main Frame
(No. 7-3)
, align the holes and secure the
Handlebar (No. 1)
to the
Main Frame (No. 7-
3)
using 4
Screws (No. 2)
. Tighten and secure with
Allen Wrench (A)
.
Locate and remove the battery cover from the back side of the
Monitor (No. 19)
. Install
(2)
AAA batteries and replace the back cover.
Connect the wire coming from the (Right Tube) of the
Main Frame (No. 7-3)
to the wire
coming from the back of the
Monitor (No. 19)
.
STEP: 4
Attach the
Left
and
Right Pedals (No. 9
and
No. 10)
to the
Left
and
Right Cranks (No.
17
and
No. 18)
.
Left Pedal:
align the
Left Pedal (No. 9)
with the
Left Crank Arm (No. 17)
at 90
degrees. Gently insert the pedal into the crank arm, turn the pedal
counter-clockwise
as tightly as you can with your hand. Tighten and secure with
Spanner (B)
.
Right Pedal:
align the
Right Pedal (No. 10)
with the
Right Crank Arm (No. 18)
at 90
degrees. Gently insert the pedal into the crank arm, turn the pedal
clockwise
as tightly
as you can with your hand. Tighten and secure with
Spanner (B)
.
The assembly is complete!
19
Содержание SF-B1411
Страница 3: ...2 EXPLODED DRAWING ...
