EZ Tilt-Up System
24
of
28
Rail Splice Installation
– 1/4 or 3/8
1/4 Rail Splice to Rail Sections
3/8 Rail Splice to Rail Sections
Where a splice is required for the Rail, the splice
should be inserted before the Rail is fastened in
place.
Slide the Rail Splice onto the end of the Rails
and center.
Torque 1/4” Flange Nuts to 7.5 ft.
lbs.
Where a splice is required for the Rail, the splice
should be inserted before the Rail is fastened in
place.
Slide the Rail Splice onto the end of the Rails
and center. Torque 3/8
” Flange Nuts to 15 ft.
lbs.
Where rail splicing is required, either the 2 bolts
for the 3/8” rail slot or the 4 bolts for the 1/4” rail
slots can be used.
Shown is the 4 bolts for the 1/4” rail slot version.
