a Screw Cap
b Cutting plate (coarse)
c Cutting plate (medium)
d Cutting blade
e Feed screw
f Head
g Hopper plate
h Food pusher
I
Motor housing
Switch
k
Locking knob
j
Parts identification
To mince meat
(Assembling)
Place Head tightly onto Opening of Motor Housing.
Holding Head with one hand, tighten Locking Knob clockwise.
Place Feed Screw into Head, long end first, by turning Feed Screw slightly until it is set into Motor Housing and
cover the transmission shaft.
Place Cutting Blade onto Feed Screw shaft with the blade facing the front as illustrated.
If it is not fitted properly, meat will not be ground.
Place desired Cutting Plate next to Cutting blade, gap align the pin of head.
1
2
3
4
·
5
lossen
OFF
ON
REV.
ON
OFF
REV.
