Binghamton, NY 1.877.786.6299 fax: 1.800.786.0329 www.sunmaxxsolar.com
© 2014 SunMaxx Solar LLC. Specifications subject to change without notice.
2
Only use the solar hot water system as intended and described in the Installation Manual;
deviations from the Installation Manual will void the warranty and may lead to fire,
property damage, and personal injury.
Solar hot water system must be properly installed in accordance with Installation and
Technical Manual before it is used.
Do not store any combustible materials in the vicinity of the system. (dry leaves, tree
branches, gasoline, and other combustible materials)
Wear protective gloves and safety glasses during installation.
Use caution while handling the evacuated tubes; the metal part of the evacuated tube
might be HOT.
Keep the solar hot water system and components away from children and animals.
BEFORE YOU START
The assembly of the solar hot water system requires two able persons with the ability to lift
75 pounds each.
Best to install on a cool and cloudy day.
Store evacuated tubes in dark or shaded places until insertion into the manifold.
Exposure of the solar collector with installed evacuated tubes to direct sunlight for
extended periods without protective heat transfer fluid may void warranty (if exposed to
direct sunlight for thirty or more days). See warranty for additional information.
It is recommended to remove the evacuated tubes from the VDF collector if the system will
be exposed to direct sunlight for extended periods of time.
THINGS YOU NEED
10 mm and ½ inch ratchet
Adjustable wrench
Liquid soap or other non‐flammable lubricant
