SunMaxx Solar ADVANCED SOLAR CONTROLLER, Руководство пользователя

Страница: 21 / 43

21
¤¤ Service ---------- - -
Sensor Options
Energy Measurement
Pump P1
PhAC SC
Pump P2 No SC
Glycol DowFrost HD
Glycol Mix 50%
£ Factory setting no %
C
In addition, Pump P2 offers a Boost setting for use with a booster pump, commonly used in
drainback systems. This setting should be used when a second pump is installed in series on the
primary circuit to assist
Pump P1 at system start-up.
The run time for the booster pump is set when the
Boost operation is selected on the Service
menu (Boost 1 min, Boost 2 min, etc.).
Important Note:
Boost is only available for System 1 (see 1.4.1 System 1 )
1.12. Glycol
This submenu allows you to select either NO or DowFrost HD according to your system setup.
1.13. Glycol Mix
x
If you have chosen to use a propylene glycol solution in your system, you must specify the
concentration on this submenu.
x
To set the concentration, press (>) then select a percentage between 0 and 50% (in 10%
increments) with the ( + ) or ( - ) buttons
1.14. Reset to Factory default settings:
x
Press (>) to highlight this line if you want to
reset all settings to their factory default.
x
Select “ yes ” with (+) key.
x
Press (<) repeatedly to return to the main
¤¤ Service ---------- - -
External Sensor no
Protection Function
Sensor Options
Energy Measurement
Pump P1
PhAC SC
Pump P2 No SC
£
Glycol No C
¤¤ Service ---------- - -
Protection Function
Sensor Options
Energy Measurement
Pump P1
PhAC SC
Pump P2 No SC
Glycol DowFrost HD
£ Glycol Mix 50% %
C
IMPORTANT NOTE: The factory default setting on the Operation Menu is OFF. This prevents
system components ( P1 , P2 , P3 ) from operating until system is set up. To turn on the system,
change the setting to AUTOMATIC (Active) . See Operation menu / 3.1 for further info.