Step 1: Connecting the Equipment
Step 2: Time Setting
Step 3: Zone Selection
Place the Controller on a wall in the
most convenient location. Locate
one sensor in each growing room,
in a place presenting the average
plant conditions and protecting the
enclosure from light bulbs, heat
sources, spray and condensation.
Sensor must be hanged from the
ceiling with the included cable, tied
to the enclosure fl anges as shown
: it is important to direct the sensor
connector toward the fl oor.
Note : The sensors have light de-
tectors on both sides, allowing
them to be placed along the walls.
1.
Controller
2.
Output box
3.
Sensor
4.
Power supply
5.
Network cable
6.
Telephone cable
New units will require the user to enter the time. See Time
Setting on page 4 and begin at Step 5.
Turn knob only (do not press) to select zone #1 or #2 or to
view the time. The indicator for the selected zone remains lit at
all times, except when the time is displayed.
WARRANTY SERVICE: Please read warranty information fi rst
If after reviewing the troubleshooting tips the unit will still not work, you should return it to the
Dealer where you purchased the controller. They will be able to further evaluate the unit and test its
various components and quite possibly will be able to identify and/or fi x any problems. If the Dealer
is unable to fi x the unit, they will return it to us for factory repair.
If there are no Dealers in your area, you may contact us directly for technical support. If we cannot
help you resolve the problem over the phone, we will issue you a RMA # (return merchandise
authorization) authorizing you to return the unit to us for factory reconditioning (if the unit is under
warranty). Contact the number below for a RMA and shipping address. Complete the form below
and include it with your unit. Also please write the RMA # on the outside of the box.
Please package the unit in its original packaging. If it is damaged in shipment we cannot be
responsible.
Once we receive the unit back, we will repair or replace the controller within 48 hours (business)
and return it to you freight prepaid via FedEx or UPS ground shipment.
Include the following if returning directly to Titan Controls
•
Proof of purchase • This completed form • RMA # on the outside of the box
Return Merchandise Authorization Number (Required
Company Name: ____________________________________________________________________________________
Contact Name: _____________________________________________________________________________________
Address: __________________________________________________________________________________________
____________________________________________________________________________________________________
Phone #: ___________________________________________________________________________________________
Email address: _______________________________________________________________________________
What is the nature of the problem?
_________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________________________
____________________________________
Send to your nearest location – shipping address will be given when the RMA # is issued:
www.titancontrols.net
For technical assistance call us at 1-888-80-Titan or 1-888-808-4826.
®
