OPERATIONS
Inspection before driving
Driving tips
Inspection to the following items must be done before driving. One
should never neglect these inspections.
10
Items to be
inspected
Purpose of inspection
Steering handle
Check to ensure that is smooth;
Check to ensure that is flexible;
Check to ensure that is not shaky and loose.
Brakes
Check to ensure a proper resistance for both
front and rear braking levers;
Check to ensure that there isn’t a ‘spongy’
feeling;
Check to ensure that there isn't any slippage.
Tires
Check to ensure that air pressure is proper;
Check to ensure that the tire tread is proper;
Check to ensure if there are cracks or cuts
Fuel volume
Check to ensure that there is enough fuel for
the planned distance.
Lights
Check all lights, including headlight, meter
light, taillight, braking light, license plate
light, turning signal lights and position light.
Indicating
lights
Check turning indicating light, high beam
light and mobile indicating light.
Horn and
brake switch
Check to ensure that work properly.
Engine oil
Check to ensure that the oil level is normal.
Fuel throttle
Check to ensure a proper play for the
throttle cable and throttle grip;
Check to ensure the turning up is free and
the turning back down can be abruptly back
down.
Warning:
If this is your first time to drive this type of scooter,
you are suggested to be practice in a safe and non-crowded field
until you are fully familiar with control and operation of this
motorcycle. One-hand driving is extremely dangerous. Keep
both hands firmly on the handlebars and both feet on the
footrests. Under no circumstance should both hands be removed
from the handlebars.
Warning:
Don’t reduce the speed when you are making a
cornering. Slow down to a safe speed before cornering.
When the road surface is wet or slippery, you must reduce
speed. Obey the speed limit and traffic regulations.
Starting the engine
Insert the key into the ignition switch and turn it clockwise to
position .
1. Electric-start
Fully pull in the brake lever, and press down the start button , the
engine will be started.
Notes:
Release the start button immediately after starting is
successful, otherwise harm is done to the engine.
If the engine cannot be started after pressing the start button for 5
seconds, you should postpone it for 10 seconds before try it once
again.
If the engine can not be started even after pressing the start button 2
or 3 times, please turn the throttle grip up by 1/8 to 1/4 circle while
try it once again.
Don't keep the starting motor working constantly, which causes
battery power consumed too much and harm is done to the starting
motor.
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL SUNL
