Fig.7: Insert Cant Beam end (M1)
into cant beam bottom tube
（
M2
）
.
Fig.8: Insert cant beam (M1) into the big
top connector (S). By using bolt (DD)
、
washer (BB) and nut (EE) fix cant
bottom tube (M2) to cant connector(H).
Fig.9: Insert long middle beam (N1) into long
middle beam bottom tube
（
N2
）
, then
insert short middle beam
（
P1
）
into short
middle bottom tube
（
P2
））
.
Fig.10: Insert long middle beam(N1/N2)into big
top connector(S).then fix the hook
（
T
）
to the
big top connector
（
S
）
,attach short middle
beam(P1/P2
）
to middle beam connector (G).
Fig.11: Cover the big canopy (U) on top, do
not spread completely.
Fig.12: Install small top cant beam (R) and small
top connector(Q
）
.
Fig.13: Attach the assembled
small top cant beam (R) to the
cant beam (M1).
