Fig.7:
Fix Small panel of top frame (N2) to Long panel of top frame (N1) by using bolt (DD) and washer (BB).
Fig.8:
Fix one end of Slanting bar (F) to the top of Post (A) by using bolt (AA) and washer (BB).
Fig.9:
Attach Slanting bar Connector (H) to the corner of the top frame (N1 & N2) by using bolt (CC) and
washer (BB), then insert another end of Slanting bar (F) to Slanting bar Connector (H).
Fig.10:
Insert Long mid top bar (G1) and Short mid top bar (G2) into the Mid top bar connector (I).
Fig.11:
Fix long mid top bar (G1) to short panel of top frame (N2) and short mid top bar (G2) to long panel of
top frame (N1) by using bolt (CC) and washer (BB). Put the Large canopy (R) on the big top; do not spread it.
Fig.12:
Insert Small top bar (L1 & L2) to Small top connector (K), screw the Pothook (M) to Small top
connector (K).
Fig.13:
Place the Small canopy (Q) on the small top bar (L1 & L2) and tighten.
Fig.14:
Screw the Top Finial (P) to Small top connector (K).
Fig.15:
Fit assembled small top to the corner of top frame, attach the netting of small canopy on inside of top
frame.
Hardware Pack 3
FF
Plastic Ring
104 PCS
EE
Ф
8*180 peg
16 PCS
H
