5
Step #2: Top Frame Set-up
Fig. 2-1:
Screw Center Hook (J) into the Larger Roof Connector (E) and secure them properly.
Fig. 2-2:
Connect Top Roof Supporter (F) with Larger Roof Connector (E). Attention here: the end of Label
“→F”
affixed on Larger Roof Connector (E) is used to assemble F.
Fig. 2-3 & 2-4:
A ladder is needed for this step--- When placing Larger Roof Connector (E), please make sure
that, the middle connecting end of E labeled with
“→H2” should be directed to Long Bar (C1); while the part
labeled with the logo
“→H1” be directed to Short Bar (C2).
Connect one end of the Corner Supporting Bar (G1&G2) and Top Roof Supporter (F), and fix the other end of
(G1&G2) with Big Screen (A).
Fig. 2- 5 & 2-6:
Connect one end of Side Supporting Bar (Long) (H1) and Larger Roof Connector (E), and
secure the other end of (H1) with Long Mosquito Netting Guider (D1) together to the Short Bar (C2) with
Screws (BB) and Washers (CC).
Fig. 2-7:
Do the same for Side Supporting Bar (short) (H2) and Larger Roof Connector (E), then fix them with
Long Bar (C1) using (BB) and (CC), to complete top frame assembly.
