BB
M6 Washer
16 PCS
DD
M6 Nut
8 PCS
EE
M6*40 Flat bolt
8 PCS
Hardware Pack 2
Fig.4:
Use bolt (CC) and washer (BB) to fasten the beams(E1,E2) on the posts(D1,D2,D3), then use
bolt (II) and washer (BB) to fasten the beam support tube on the beam (E1, E2).
Fig.5:
Firstly inset the tabletop (I) connector into the U plate on the posts (D2, D3). Then use bolt
(CC) and washer (BB) to fasten the tabletop on the post (D2, D3).
Fig.6:
Use bolt (CC) and washer (BB) to fasten the tabletop support (J) beneath the table.
Fig.1:
Firstly attach the bottom of posts (D1,D2, D3) into stake cover(A) and raise them up. Then use bolt
(AA) and washer (BB) to fasten the stake plate(C) on the bottom of posts.
Fig.2:
Attach the short beam (E1) with long beam (E2) tightly using bolt (CC) and washer (BB).
Fig.3:
Use bolt (AA) and washer (BB) to fasten the middle beam connector (F) on the assembled beams.