5
*After steps above, use screwdriver and wrench to tighten all the hardware, but not too tight.
Step.6:
Assemble the canopy (S) on top
frame (do not tighten) (Fig6-1). Fully
assemble top canopy (S1) on small top
frame, (Fig.6-2). Tie the bug netting
around the top canopy to canopy and
then fully stretch canopy (S) and fix it to
the end of corner connectors (D) (Fig 6-3)
Step.4:
Use Screw (AA) and Flat washer
(BB) to fix the Corner connector (D) to the
poles (Fig4-1). Use Screw (AA) and Flat
washer (BB) to assemble the Screen (C) and
pole (Fig4-2).
Use Screw (AA) and Flat washer (BB) to fix
the Corner connector (D) and the Screen (C)
(Fig4-3)
Fig.5-2 E
D
Step.5:
Use Screw (DD), Flat washer
(EE) and Nut (CC) to joint Top pole
(E) and Center connector (F) (Fig
5-1). And then lift the assembled top
frame to insert the other end of the
Top pole (E) into the Corner
connector (D) (Fig.5-2)
)LJ
S1
S
)LJ
)LJ
Fig.5-1
