4
Fig.1
Step1
. Insert Fence B1 into pole A2 ,then fix B1 by pulling
it down as Fig.1. Assemble Fence B1,B2 and Pole
A1,A3,A4,A5 in the same way according to picture above
Step 2
. Use screw (AA), flat washer (BB) to connect Peg Fitting (K) to
Fence ( B1) and Pole (A4 or A2 ), as Fig.2. Assemble Peg Fitting (J) to
Fence(B2) and Pole(A1) in the same way . Do not tighten the screws.
Step 3
. Use screw(AA)
,
flat washer(BB) to assemble Peg Fitting(I)
and Fence(B1 and B2) and Pole(A3 or A5), as Fig.3. Do not tighten
the screws.
Step 4.
Use screw (AA) and flat washer (BB) to Fix the corner connector
(D) to the poles as Fig4-1. Insert the pin on the screen(C) into the
mounting hole on the pole and then pull down the screen, as
Fig4-2,.Use screw(AA) and flat washer(BB) to assemble the
screen( C) and corner connector ,as Fig4-3
B1
A2
Fig.3
Fig.2
Fig.4-2
Fig.4-3
Fig.4-1