background image

 

 

 

 

 

 

 

 

 

Note: 

Please keep these extra parts since they are not covered in product warranty. Use these extra parts to fasten 

the electrical cord with the top beam if a light is used.   

 

 

 

USE & CARE: 

 

1. This gazebo is not a permanent structure and should be disassembled & stored away after use.   

2. Do not repack your gazebo until completely dry.   

3. This gazebo must be assembled by two adults or more.   

4. This gazebo must not be left erect in windy conditions.   

5. Loading limit of the hook is 33 lbs. 

6. Loading limit of the ring is 25 lbs 

7. Steel components for garden accessories and furniture are treated with rust inhibiting paint that protects 

them from rust. However, due to the nature of steel, surface oxidation (rusting) will occur if this protective 

coating is scratched. This is a natural process. To minimize this condition, it is recommended that care be 

taken when assembling and handling the product in order to prevent the paint from being scratched. If 

scratching or damage occurs, it is recommended that the area be touched-up immediately with rust inhibiting 

paint, which is included in the package. Surface rust can be removed easily using a very light application of 

common cooking oil. If surface oxidation (rusting) occurs and no measures are taken to correct it, the oxidation 

may start dripping onto the deck or patio, which may cause damaging stains that may be difficult to remove. 

Extra Parts 

  XX 

Electrical cord tie 

10 PCS 

 

 

 

 

Содержание L-GZ043PST-7L








Отзывы: