5
R
Fig.9
A
B
A(B)
R
S
R
F
Fig.8
A
B
Step 2: Top Assembly (Note: Ladder needs to be used in step 2.4 and 2.5)
2.1 Insert corner connector (I) into the holes at the top corner of panel (A,B) (Fig. 5)
2.2 Insert hook (P) into center connector (J) (Fig.4)
2.3 Assemble hanging pole (H) and top pole (G) (Fig.5)
2.4 Connect one end of the top pole (G) with center connector (J) (Fig 6). The other end of the hanging pole is fixed
to the corner connector with bolt (AA), flat washer (BB) and nut (CC) (Fig. 5)
2.5 Insert one end of the long side
support pole (K) and short side
support pole (O) into the center
connector (Fig.6). The other end
is fixed to pole (D) and pole (F)
with bolt (AA), flat washer (BB)
and nut (CC) (Fig. 7)
2.6. Connect pipe connector (S)
with pole (F) by using bolt (EE)
and flat washer (BB); Insert one
end of pipe (R) into pipe
connector (S) (Fig.8); Fix the
other end of Pipe (R) to Panel
(A,B) with bolt (EE) and flat
washer (BB) (Fig.9)
After Step 1 and Step 2, use wrench (DD) to tighten all hardware. Note: do not tighten them excessively
A
B
A
B
Fig.6
Fig.7
A
A
B
B
A
B
