Sunjoy G-BQ010PSS, Руководство пользователя

Страница: 11 / 22

OWNER’S MANUAL
Leak Test
WARNING
•
Do not use an open flame to check for leaks.
•
Do not remove valve orifices.
•
Do not smoke during testing.
•
Do not test indoors.
•
Test outdoors in a well ventilated area.
•
A leak test must be performed each time the
Propane canister is replaced.
TEST PROCEDURE:
1. Inspect all tubes and hoses before each use.
2. If there is excessive abrasion, wear, or cutting, replace the tubes or hoses only with those
specified by the manufacturer.
3. Make sure the valve is in the off position.
4. Make sure the propane canister is correctly and securely connected to the regulator, without over
tightening it.
5. Combine a soap solution of one part soap (any mild or liquid dish soap works well) and one part
water.
6. Using a small paintbrush, spread a thin coating of the soap/water solution onto the following
connections:
•
Propane Canister – Regulator
•
Regulator – Gas Supply Tube
•
Gas Supply Tube – Valve Inlet
•
Valve Outlet – Gas Delivery Hose
RESULTS:
1. If the soap/water solution bubbles, there is a leak. Immediately disconnect the propane canister
and check the connections. Then reconnect the propane canister and repeat the test.
2. If the soap/water solution continues to bubble, remove the canister and replace the defective
parts before operating the grill.
Page 9