Fig.1:
Attach Frontboard (G1), Backboard (G2) to Screen (D) with Screw AA, then attach Sideboard (F) to boards
G1/G2 with AA as Fig.1 shown.
Fig.2:
Attach Beam (B) to Screen (D) with Bolt (CC), Washer (DD) and Nut (EE) as Fig. 2 shown.
Fig.3:
Fix Cross beam (A) to Beam (B) with Screw (BB) as Fig. 3 shown.
Fig.4:
Attach Corner connector (C) to Beam (B) and Screen (D) with Bolt (CC), Washer (DD) and Nut (EE) as
Fig. 4 shown.
Fig. 5:
Place Baseboard (E) into the pre-assemled planter as arrow directed on Fig. 5.
Now, the arbor is ready to use!
