OPERATION AND FEATURES
Remote Control
Using the Control Panel
Adjust Brightness
This function will
cycle through the
four different levels
of flame brightness.
Hold 10 seconds to
switch readout
between
℉
and
℃
.
Power
This will turn the unit
the power
button on the control
heater function.
Adjust Heater
This function will cycle
through the different
temperature levels
62-82
℉
(17-27
℃)
of
the heater. Hold 3
seconds, Temperature
figure blinking and
can adjust. Default
temperature is 82
℉
(27
℃
).
Timer
This will allow you to set
the automatic switch off
on the fireplace. Setting
can be 0.5h to 9h.
PS:
The button light will
off when no opreation in
up when press the button
again
.
Display
Display could be awake
by pressing any button.