Fig.21: Attach small canopy cover plate (U1, U2) on small canopy oblique beam (F) using bolt (FF) and washer (BB).
Fig.22: Use bolt (GG) and washer (BB) to fasten small canopy oblique beam cover plate (K2) on the small canopy.
Fig.23: Use bolt (II) and washer (BB) to fasten small canopy cover plate (K3) on the small canopy.
Fig.24: As shown in figure, assemble the big canopy cover plate according to the numbers shown in assembly
drawing.
Fig.25: Insert the assembled upper cover plate into the slot of big canopy long side (G1) and big canopy short side
(G2).
Fig.26: Attach big canopy cover plate (T1,T2,T3,T5) on the big canopy oblique beam (D) using bolt (FF) and
washer(BB).
