Fig.8: Use bolt (AA) and washer (BB) to fasten big canopy frame short side (G2) with big canopy frame long
side (G1).
Fig.9: Use bolt (AA) and washer (BB) to fasten big canopy oblique beam (D) with assembled big canopy
frame.
Fig.10:
用螺栓
(DD)
、垫片
(BB)
和螺母
(EE)
把大顶斜梁
(D)
下端固定在斜梁下连接件
(I1)
上。
Fig.11:
用螺栓
(AA)
和垫片
(BB)
把大顶中梁
(E)
上端固定在大顶框上。
Fig.12: Attach big canopy middle beam (E) on the middle beam connector (I2) use bolt (DD), washer (BB)
and nut (EE)
Fig.13:
。
Attach hook (J) on the small canopy connector (H).
Fig.14: Attach the upper side of small canopy oblique beam (F) on small connector (H), use bolt (DD),
washer (BB) and nut (EE).
Fig.15: Attach small canopy oblique beam (F) on the big canopy frame use bolt (AA) and washer (BB).
