background image

4

4. 

Use only extension cords that are intended for outdoor 

use. These extension cords are identified by marking 

"Acceptable for use with outdoor appliance; store indoors 

while not in use". Use only extension cord having an 

electrical rating not less than the rating of the product.  

Do not use damaged extension cords. Examine extension 

cord before using and replace if damaged. Do not abuse 

extension cord and do not yank on any cord to disconnect. 

Keep cord away from heat and sharp edges. Always 

disconnect extension cord from the receptacle before 

disconnecting the product from the extension cord. 

m

WARNING!

 

To reduce the risk of electrocution,  

keep all connections dry and off the ground. Do not touch plug 

with wet hands. 

5. 

To reduce the risk of electric shock, this appliance has  

a polarized plug (i.e. one blade is wider than the other).  

The appliance plug will fit into a polarized outlet only one way.

  If the appliance plug does not fit fully into the outlet, 

reverse the plug. If the plug still does not fit, make sure 

that you are using the correct polarized wall outlet. If the 

plug still does not fit, contact a qualified electrician to install 

the proper wall outlet. Do not modify the appliance plug, 

power cord receptacle, or power cord plug in any way. 

6. 

To prevent the appliance cord from disconnecting from the 

extension cord during operation, make a knot with the two 

cords as shown in Table 1.

7. 

Do not abuse the cord. Never pull the pressure washer 

by the cord or yank the cord to disconnect it from the 

receptacle. Keep the cord away from heat, oil, and  

sharp edges.

Risk of Electrocution

•  Inspect cord before using.
•  Do not use if cord is damaged.
•  Keep all connections dry and off the ground.
•  Do not touch plug with wet hands.
•  Keep cord away from heat and sharp edges.
•  Do not spray electrical apparatus and wiring.

Risk of Explosion

•  Do not spray flammable liquids.
•  Do not use acids, bases, solvents, or any flammable 

material in this product. These substances can cause 

physical injuries to the operator and irreversible damage to 

the machine.

Additional Safety Instructions

•  High-pressure: keep clear of nozzle.
•  Injection hazard: equipment can cause serious injury if the 

spray penetrates the skin.

•  Do not point the gun at anyone or at any part of the body.
•  In case of skin penetration, seek medical aid immediately.
•  Before servicing, cleaning, or removing any parts, shut off 

the power and relieve pressure.

•  This machine is not suitable for connection to the potable 

water mains.

m

          

WARNING 

 

m

Electric shock may cause SEVERE INJURY or 

DEATH. Heed these warnings:

•  Do not allow any part of the electric pressure washer 

to make contact with water while it is in operation. If 

the appliance becomes wet while turned off, wipe dry 

before starting. 

•  Do not use an extension cord over 25 ft. The 

pressure washer comes equipped with a 35 ft power 

cord. Combined cord length must not exceed 60 ft. 

Any extension cord must be 14-gauge (or heavier) to 

safely power the pressure washer.

•  Do not touch the appliance or its plug with wet hands 

or while standing in water. Wearing rubber boots 

offers some protection. 

EXTENSION CORD CHART

Cord Length:

Min. Wire Gauge (A.W.G.):

25 ft (7.6 m)

14

(B) Connect plug and receptacle

Cord set

Appliance cord

(A) Tie cord as shown

Table 1. Method of Securing Extension Cord

Содержание SPX4003-ELT-RM





















Отзывы: