sunjoe SJ1440SG-RM, Руководство оператора

Страница: 13 / 24

13
LCD Display Indicators
Battery
The battery indicator displays the battery's current voltage level.
The battery's voltage is shown in DC volts.
Output Power
The output indicator displays the total power being pulled from the AC
inverter or the DC terminals (consumption power).
Input Power
The input indicator displays the total power being input into the generator
from the solar panel(s) or the AC charger (charging power).
Error
The error indicator displays an error code, if any. See troubleshooting
section on page 20.
NOTE: If error code "E05" is displayed, the battery should be recharged
using the AC charger, solar charge controller, or any of the other available
charging options.
Time
Remaining
The time remaining indicator displays the expected amount of time the
battery will last based on current usage.
NOTE: Remaining time is calculated based on 100 Ah battery. There will be
a discrepancy between the display and the actual working time if you use
or replace with any other kind of lead-acid battery.
Battery
Capacity
The battery indicator displays the percentage of battery's capacity
remaining based on current usage.
Solar
Charging
When the generator is connected to a solar panel, the solar charging
indicator will be illuminated. When the solar panel is initially connected
(or disconnected), the LCD display's backlight will be illuminated for
approximately 5 seconds and the generator will beep.
AC Charging
The AC charging indicator will be displayed when connecting to any
sources of AC power. Upon initial connection, the AC charging indicator
will be illuminated, the LCD display's backlight will be illuminated for
approximately 5 seconds and the generator will beep.
Battery Level
The battery level indicator displays the battery's approximate remaining
capacity.
USB Output
The USB indicator will be illuminated if output loads (devices) are
connected to any of the USB ports. If nothing is connected to any of the
USB ports, the indicator will be dimmed.
AC Output
If a load (device) is connected to any of the AC outlets, the AC output
indicator will be illuminated. If no loads/devices are connected to any of the
AC outlets, the indicator will be dimmed.
NOTE: There is no AC output power if the inverter is not turned on.
DC Car
Lighter Output
The DC car lighter output indicator will be illuminated if any load/device
greater than 1 amp is plugged into the DC car lighter port. If no load/device
greater than 1 amp is plugged into the port, the indicator will be dimmed.
NOTE: The DC car lighter indicator will not be illuminated if the generator is
turned off, but power will still available at the DC car lighter port.