Assembly
Parts List
• Mulch plug
• Grass catcher bag
• Manual
• Discharge Chute
Note:
• Carefully remove the parts from the box.
• Inspect the parts carefully in order to verify that no
breakage or damage occurred during shipping.
• Do not discard the packing material until all parts have
been examined.
Assembling the Handle (Fig. 2)
1.
Remove any packing material which may be between
the upper and lower handles for sahipping purposes.
2.
Pull up and back on the upper handle to raise the
handle into the operating position. Make sure the lower
handle is seated securely into the handle mounting
bracket.
3.
Align the holes (C) between the upper handle (4) and
lower handles (5). Insert the bolts (B) and tighten them
with the wing nuts (C) provided. (Fig. 2)
4.
Secure the lower handle to the bracket with the handle
knob on each side. (Fig. 2)
Installing the Grass Catcher Bag (Fig. 3)
1.
UNPLUG THE POWER CORD, AND WAIT FOR BLADE
TO COME TO A COMPLETE STOP.
2.
Lift the chute cover. (1)
3.
While holding up the cover (1), place the grass catcher
bag hanger hooks (2) into the opening on the chute
cover (1) to allow the hanger hooks to attach to the rod
(3) which secures the chute cover.
NOTE:
For optimal performance empty grass bag often
during use. A full grass bag will inhibit performance of the
mower and collection of grass clippings.
Install the Side Discharge Chute (Fig. 4)
This mower has 3 different functions-mulch, side discharge,
and rear bag. If you wish to discharge the clippings rather than
mulch, perform these steps.
1.
UNPLUG THE POWER CORD, AND WAIT FOR BLADE
TO COME TO A COMPLETE STOP.
2.
Lift the side discharge cover (1).
3.
Align the grooves on the discharge chute (2) with the
pins on the underside of the discharge cover (1).
4.
Lower the discharge chute until the hooks on the
mower deck are secured in the openings in the
discharge chute (2).
5.
Release the side discharge cover (1).
5
Fig. 2
Fig. 3
Fig. 4
4
5
A
B
C
1
2
2
3
2
1
Meijer.com
