Maintenance and Care
General
• Always keep the mower clean and free of grass clippings.
• After each cutting session, scrape or blast with water the
built up grass from the underside of the blade housing.
• Clean plastic parts with a damp cloth. Do not use solvents
or cleaning fluids on plastic components.
• Check all nuts, bolts and screws before each use.
• Store the mower in a dry area.
Blade Maintenance
The steel blade is designed to provide a fine cut in long or
tough grass. Deterioration in the quality of cut indicates blade
wear or damage. Follow these steps to determine if the blade
needs to be repaired or replaced:
1.
Disconnect
the electrical supply to the mower.
2.
Turn the mower on its side so the underside of the
blade housing is exposed.
3.
Check the blade.
a.
If the blade is blunt or has minor wear, then
re-sharpen.
b.
If the blade has major wear or damage
(i.e.: gouged, bent), replace. Please call Sun
Joe customer service (1-866-766-9563) for
assistance.
Blade Replacement
Important:
Only use original replacement parts specified for
this mower.
1.
Disconnect the electrical supply to the mower.
2.
Turn the mower on its side so the underside of the
bladehousing is exposed.
3.
Use a cloth to grip the blade or wear heavy-duty gloves.
4.
Using the spanner provided, turn the bolt counter-
clockwise to loosen and remove the bolt and washer from
the motor and remove blade.
5.
Fit the new blade, the washer and the bolt back on in the
same direction and sequence as the removal of old blade.
Service and Support
If your Mow Joe Electric Lawn Mower requires service or
maintenance, please call 1-866-766-9563 for assistance.
Model and Serial Numbers
When contacting the company or reordering parts, you will
need to provide the model and serial numbers of your product.
These are found on the decal affixed to the housing or handle
of your mower. Copy these numbers into the space provided
below.
Figure 15
A
B
A.
Blade
B.
Spanner
Figure 16
A
B
C
A.
Bolt
B.
Blade
C
. Washer
Record the following numbers from the housing or handle of your
new product:
M J 4 0 1 E R M
Model #:
Serial #:
11
