- 9 -
SUNIX Co., Ltd.
TEL : +886-2-8913-1987
Email : [email protected]
Power Adapter Connection
Plug the DC plug into the DC jack and plug the AC adaptor into an electrical
outlet.
Please connect both +24VDC and +12VDC power adapters to the 6-pin
Mini-Din connector separately. If you do not need any +24VDC power output
to your powered USB device, you can skip the +24VDC power adapter using.
You can NOT plug the +24VDC power adapter to +12VDC Mini-Din connector.
Note:
1.
+24V power adapter provides 2A total 48W to +24VDC powered USB
device. +24VDC powered USB channel built in 3A PTC fuse.
2.
+12V power adapter provides 2A total 48W to all +12VDC powered USB
devices using. Each +12VDC powered USB channel built in 1.55A PTC
fuse.
3.
The PTC may temporarily allow higher rate of power current to be drained.
Typically, a PTC will shut off after approximately 15 seconds drawing
more than the fuse tolerant current specification. The PTC will turn off
the power for each individual port if an unusual overload is sustained.
DC 24V Power Adapter Input
6-pin Mini-Din Connector
DC-12V DC-24V
DC 12V Power Adapter Input
6-pin Mini-Din Connector
Safety First
To avoid damaging, make sure to disconnect power connection
before wiring or disposing the powered USB Hub.
