___________________________________________________________________________________
23
4.1 Configure Serial Port Settings
After the board and serial port drivers are installed, please refer to following
instructions to configure Serial COM settings.
(1)
Please launch the “
Device Manager
”.
(2)
Right click the “
SUNIX Serial Card
” item from the “
Multifunction
adapters
” sub-tree and click “
Properties
”.
(3) On the
“
Port Control
” tab, select a port to configure.
* Click
“
OK
” to approve the settings for the selected port.
* Click
“
Set to All
” to approve the settings for all COM ports.
