SUNIX Co., Ltd.
TEL : +886-2-8913-1987
Email : [email protected]
2.
TX Period:
set the period the port wait for retransmit next EAPOL PDU during an authentication session.
3.
Supplicant Timeout:
set the period of time the switch waits for a supplicant response to an EAP request.
4.
Server Timeout:
set the period of time the switch waits for a server response to an authentication request.
5.
Max Requests:
set the number of authentication that times out before authentication fails and the authentication
session ends.
6.
Reauth period:
set the period of time after the connection of clients be re-authenticated.
7.
Click
Apply
.
802.1x Misc Configuration interface
4.1.32.2
MAC Address Table
Use the MAC address table to ensure the port security.
Static MAC Address
You can add a static MAC address; it remains in the switch's address table, regardless of whether the device is physically
connected to the switch. This saves the switch from having to re-learn a device's MAC address when the disconnected or
powered-off device is active on the network again. You can add / modify / delete a static MAC address.
Add the Static MAC Address
You can add static MAC address in switch MAC table.
1.
MAC Address:
Enter the MAC address of the port that should permanently forward traffic, regardless of the device
network activity.
2.
VID:
Type in VID of the MAC address.
3.
Port No.:
pull down the selection menu to select the port number.
4.
Click
Add
.
5.
If you want to delete the MAC address from filtering table, select the MAC address and click
Delete
.
Static MAC Addresses interface
MAC Filtering
By filtering MAC address, the switch can easily filter pre-configure MAC address and reduce the un-safety. You can add
