771-ESWQIG0000-NCI
Introduction
DIN-Rail Installation Step
Please check if the following items are present and in good condition upon opening
your package. Contact your vendor if any item is damaged or missing.
Management Industrial Ethernet Switch
Accessories
SUNIX Din Rail Accessory Package
1
Wall Mountable Accessory Package
1
Fiber Lid
2 ( For ESW-80XX-G Series Model )
×
×
×
Features
Fast redundant ethernet ring with recovery time < 10ms (Elite Ring)
Support SNMPv1/v2c/v3 & RMON network management
Support Web-based, Telnet, Console, Utility configuration
Supports IGMPv1/v2/v3 snooping, Quality of Service determined by port
Supports port base/802.1Q VLAN and Dynamic VLAN Register Protocol (GVRP)
Event notification by Email, SNMP trap and Relay Output
Supports online port mirroring and IP security
Multi Ring and Dual Homing support
Port rate limiting and broadcast storm limiting
Redundant dual low-voltage DC inputs (12 ~ 48VDC)
Supports 802.3ad, LACP for optimum bandwidth utilization
Port Trunking for optimum bandwidth utilization
Long-haul transmission distance up to 30km (Fiber port)
Support all LAN switches setting at the same time by the SUNIX commander
Din-rail/Wall-mounting installation
Version 1.0
SUNIX Ethernet infrastructure products. SUNIX Ethernet Switches(ESW
Series) are designed focus on Ethernet deployment in automation applications
and specially developed for industrial Ethernet applications with all concerns
for industrial environments taken into consideration. The advanced
management features, Elite-Ring (communication redundancy technology),
easy configuration and robust mechanical from factors enable quick Ethernet
installation for factory, transportation , building and utility automation
applications. Redundant power inputs and relay output alarm provides the
possibility to build an on-site alarm system. SUNIX switches are ideal for any
application where performance demands are highest, environments are harsh
and operations are nonstop.
Elite-Ring Technology
Redundancy is always a primary
consideration for developing secure
and reliable industrial networks.
SUNIX Managed Switches are
equipped with Elite-Ring feature
which provides industrial Networks
with high-speed communication
redundancy.
Elite-Ring employs a ring structure
of either copper or fiber optic cable
or combination of both by using two
ports of each switch in a ring network.
A network can recover in less
than 10ms.
SWIT
CH
In
d
us
trial
Mana
g
e
d
SUNIX CD
Quick Installation Guide (This Document )
User Manual ( In CD )
Industrial
Management Ethernet Switches
Wall-Mounting Installation Step
SUNIX Comander Management Utility Software
SUNIX Commander is a powerful Switch managed software designed by
SUNIX Group. It could provide users set up all Switches in the ethernet by
one time. Users could set up one group Switches IP Address, every kind of
IEEE 802 Protocol, upgra e at the same time. SUNIX
managing software lowers users' burden and saves time.
d
Commander a strong
Package List
8082-GT 8 Ports 10/100Base-TX + 2 Ports 10/100/1000Base-TX
8082-GP 8 Ports 10/100Base-TX + 2 Ports 1000Base-FX (SFP Type)
Model Specification
8062-GM 6 Ports 10/100Base-TX + 2 Ports 1000Base-SX Multi Mode
(
)
8062-GS 6 Ports 10/100Base-TX + 2 Ports 1000Base-LX Single Mode
(
)
8062-GT 6 Ports 10/100Base-TX + 2 Ports 10/100/1000Base-TX
8062-TX
8 Ports 10/100Base-TX
8062-MM 6 Ports 10/100Base-TX + 2 Ports 100Base-FX (Multi Mode)
8062-SS
6 Ports 10/100Base-TX + 2 Ports 100Base-FX (Single Mode)
Quick Installation Guide
