Sunit c6, Руководство пользователя, Страница: 8 / 32

6
7
1
2
3
4
5
3.3.1. Display buttons & indicators
1. Ambient light sensor for automatic brightness adjustment
2. Start / backlight on/off
3. Status indicator LEDs:
- green continuous: Computer on
- green blinking: Computer is starting
- yellow continuous: Preheating mode
- yellow blinking (1 sec./1 sec.): CPU only heating mode
- yellow blinking (0,2 sec./2 sec.): display only heating mode
- red continuous: Display backlight switched off.
4. Backlight adju (long “beep” indicates the maximum value)
5. Backlight adjustment – (long “beep” indicates the minimum value)
6. Display cable connector.
NOTE! The cable has to be attached as shown in the picture!
7. Connector for additional keyboard (e.g. AKU keypad)
3.3.2 Optional functions
For the buttons 2, 4 and 5 the alternative functions can be implemented with Control Panel’s Sunit
Telematics –application (this feature may require software update). Buttons 4 and 5 switch to volume
control buttons:
- to increase volume, press button 4
- to decrease volume, press button 5
- to mute volume press buttons 4 and 5 fast consecutively. To reset volume press either button
4 or 5 .
Adjusting backlight with alternative functions
When alternative functions are implemented with Sunit Telematics application, the following must be
taken into consideration:
- adjust backlight on and off by pressing button 2
- after pressing backlight on, the red indicator LED start blinking and buttons 4 and 5 remain back-
light adjustment buttons for about five seconds, after which they resets to volume adjustment but-
tons
8