7 Commissioning
User Manual
38
Step 5
If the country code set as TH, a Grid codes
page special for Thailand will appear.
Press
to select grid code. Confirm the
selection by
Pressing
ENTER
.
If the country code set as RO or AT, a LVRT
Param page as shown in the right will appear.
Press
to select. Confirm the selection by
Pressing
ENTER
.
If the country code set as Other, a Grid Fre and LVRT Param page as shown below
will appear. Press
to select. Confirm the selection by Pressing
ENTER
.
If country selected is not the three mentioned above,
a Grid codes page as shown in the right will appear.
Press
to select. Confirm the selection by Pressing
ENTER
. When choose MV, Press
ENTER
to enter
the LVRT function selection, Press
to switch on or
off the LVRT function and Press
ENTER
to confirm
the selection.
The Kf configure item will appear only when switching on the LVRT function.
If the Country selected does not have the “Grid codes” directives,
this configuration will not affect the following procedures.
However, you may select the MV to enable/disable the LVRT
function regardless of the country selected.
Step 6
After completing the operation confirmed
that the interface above, if the country code
set as IT, AT or Other. The Pro-Stage
interface will appear. Press
to select.
Press
ENTER
to confirm the selection.
Step 7
If the country code set as other countries.
You may choose Single-stage or Multi-stage.
Press
to select protective parameter type.
Press
ENTER
to confirm the selection.
Step 8
If the selected protective parameter type is
“
Single-stage
”
or
“
[
Ⅰ
]
”
, the following
sub-menu will come up.
Press
to select
parameter,
Press
to move cursor right and
Press
to set the appropriate value.
Confirm settings by Pressing
ENTER
.
Step 9
If the selected protective parameter type is “Multi-stage” or “[
Ⅱ
]”, the
following sub-menus will come up.
Press
to select parameter,
Press
to move cursor right and
Press
to set the appropriate value.
Confirm settings by Pressing
ENTER
.
