User Manual
4 Installation Guide
11
4.3 Mechanical installation
4.3.1 Dimensions
The dimensions of the PVS are shown in the figure below (take PVS-16M-HV
for example).
mm
m
m
mm
m
m
mm
Pictures in this manual are indicative only! The real product you
receive may differ.
4.3.2 Installation site requirements
With IP65 protection degree, the PVS can be installed outdoors. Please meet
the following requirements:
Dimensions and weight of PVS should be considered sufficiently.
Ambient temperature-40
℃
~+60
℃
; Relative humidity 0~95%
Installation site should be as close as possible to PV arrays for minimum
cables and wires usage.
Installation site should be safe venting.
Never install the device in direct sunlight to guarantee optimal performance.
For big PV plants, it is suggested that the device is installed on the back side
of PV arrays.
For better heat dissipation and convenient maintenance, enough space must
be maintained around the PVS.
