Sungrow PVS-12MH-DB, Руководство пользователя

Страница: 26 / 44

5 Electrical Installation User Manual
22
Press the bolt toward the side with indentation during fixation. Make
sure the terminal is inserted into the PVS as much as possible.
5.4.2 Output connections
Lift the protective cover upwards. Then loosen the nut from gland terminals.
φ
13
Step 1
Insert the “DC+” cable through “DC Output (+)” terminal. Enough cable
bending space should be ensured.
Step 2 Strip off both protective and insulating layers with the help of a hand
crimping pliers. The length of cable conductor shall be approx. 25mm.
25mm
The copper cable is recommended for the PVS output terminal. If an
aluminum cable is selected, a copper aluminum terminal must be used
and the specification of the aluminum cable should meet the local
technical requirements.
Step 3 Connect the cable to the proper DT terminal.
Step 4 Install the DT terminal according to the following steps.