6
N
No
o..
N
Na
am
me
e
D
De
essc
crriip
pttiio
on
n
I
Tapping screw
assembly
8, including ST4.8x19 expansion bolts and tapping
screws, used for wall-mounted installation
J
Fastener assembly
6, M4x8 cross recessed countersunk head screws,
used to anchor the mounting ears to the device
3.2
Identifying the Device
The type and key technical parameters of the device can be found on the nameplate.
The nameplate is attached to the upper right corner of the device, shown by A in the
figure below.
The nameplate contains important parameters. Ensure it is intact and clearly
legible.
3.3
Checking upon Receiving
The device is thoroughly inspected and packed before delivery, but damage may be still
caused during transport. Check the following items carefully once receiving the device.
•
Check the scope of delivery for completeness according to “Scope of Delivery” .
•
Ensure that the device type is correct.
•
Check the device thoroughly and ensure there are no visible damages.
If there are any problems, contact SUNGROW or the forwarding company.
Only undamaged device can be installed and commissioned. Before installation,
ensure that:
•
The device is intact without any damages.
•
Related documents, such as quick user manual, are enclosed.
User Manual
