9
-
Immediately remove the used batteries from the product. Otherwise there
could be an increased risk of leakage.
-
Check the batteries regularly for leaks.
Leaking or damaged batteries can cause chemical burns on contact with the
skin; in this case, it is therefore essential to wear suitable protective gloves!
-
Avoid any contact with skin, eyes and mucous membranes if liquid has leaked
from the battery. In the case of contact with battery acid, rinse the affected
areas immediately with plenty of clean water and consult a doctor as soon as
possible.
-
In the case of slight contamination, clean the battery and the product contacts
with a dry, lint-free cloth before replacing the battery.
-
Remove the battery from the product if the awning is not to be used for a
prolonged period.
-
Check the polarity when inserting the battery! This is indicated in the battery
compartment. Otherwise the battery could explode.
-
Insert the battery carefully. Otherwise the product could become damaged.
-
Replace the battery in good time as soon as the remote control range
decreases or the awning stops responding.
-
Please do not throw used batteries into household waste, but dispose of them
at the collection points designated for special waste.
12
– Safety instructions for assembly
-
Technical knowledge is required to assemble the awning. Do not assemble
this awning yourself if you
o
are not sure whether the waning can be installed in the location chosen.
o
do not understand the instruction manual or parts of it
o
do not have the necessary tools.
o
do not have the necessary technical knowledge
-
Never change the design or configuration of the system without consulting the
manufacturer or an authorised representative, as this can result in a
dangerous situation.
-
Do not assemble the awning if you find damaged parts or if parts are missing.
-
When extended, the awning is affected by various forces, including wind and
rain. These sometimes considerable forces have to be absorbed by the
awning and transmitted to the structure via the mounting brackets. Under
extreme loads, excessive force can be exerted on the securing anchors.
Therefore, before you start assembling the waning, check the load-bearing
capacity of the fastening structure and, if necessary, take the necessary
measures to ensure that the brackets are securely fastened. If the attachment
is not secure, you should consult a specialist in your area.
Содержание Elba 28883674
Страница 1: ......
