35
3.3.5
Configuring Flight Mode
Click
Modes
on the left to configure the flight mode.
1)
Set self-stabilization mode, horizontal mode and manual mode.
You need to choose a 2-channel or 3-channel AUX x, set the self-stabilization mode, horizontal
mode, and manual mode to be controlled all by AUX x, and then configure the volume for three
modes in Cleanflight. For example, here we choose the 3-channel AUX1 to control these three
modes.
Click
Add Range
in
ANGLE
to run the self-stabilization mode. Select
AUX1
and the value ranging
from 900 to 1300.
Click
Add Range
in
HORIZON
to run the horizontal mode. Select
AUX1
and the value will be 1300
to 1700.
Then the rest is the value range of the manual mode. You can set the ranges for different modes
yourself.
ANGLE
(in green) indicates AUX1 is in ANGLE mode now. Try to slide the AUX1 switch, and
see whether the range changes or not.
Remember to click
Save
after any modification. If you don’t have a 3-channel AUX x, you can
choose two modes from the three.
SunFounder
