17
User's Manual
User's Manual
The SLAVE output from one XTEQ subwoofer can be connected to the SLAVE input of
a second XTEQ subwoofer. The second subwoofer will then receive the optimum audio
signals from the first.
There is no need to adjust the controls of the second subwoofer, as the audio is controlled
by the controls and EQ setting of the first. The second subwoofer does not require any
connections to its line-level inputs.
Before the EQ procedure, make sure that both XTEQ subwoofers are connected together
as shown. The microphone should be connected to the first subwoofer. The automatic EQ
procedure will take into account the effect of both subwoofers as they play in the room.
Using the Slave Input and Output
VOLTAGE SEL
ECTOR
100-120 V
T10AL 250V
220-240 V
T6AL 250V
50/60 Hz, 900 W
VOLTAGE SEL
ECTOR
100-120 V
T10AL 250V
220-240 V
T6AL 250V
50/60 Hz, 900 W
9901375_Rev-A_Sunfire_XTEQ_User_Manual_0812_PRINT_ENG.indd 17
8/12/14 7:10 PM
