User's Manual
23
CHAPTER 2
Output connections
TO RIGHT
BACK
SPEAKER
+
+
+
+
+
+
+
TO LEFT
SURROUND
SPEAKER
TO LEFT
MAIN
SPEAKER
TO CENTER
SPEAKER
TO RIGHT
MAIN
SPEAKER
TO RIGHT
SURROUND
SPEAKER
TO LEFT
BACK
SPEAKER
Speaker-Level Outputs
The TGR-3 speaker output posts
accept bare wire, speaker lugs,
dual-banana and single-banana con-
nectors. Use good quality speaker
connectors and speaker wire.
If you are using banana
plugs, make sure the TGR-3
output posts are fully tight-
ened by hand.
Always turn off the TGR-3
when you make speaker con-
nections.
It is very important to check
that the negative and positive
speaker wires do not touch.
This will prevent damage to the
TGR-3's internal ampli
fi
ers.
Speaker-level audio signals
From: Receiver speaker outputs
To: Speaker inputs
The TGR-3 can be con
fi
gured so
the surround back speaker outputs
power the surround back, side-axis,
or Zone 2 speakers. See page 41 for
more details.
The other
fi
ve speaker outputs are
fi
xed, and connect to your front, cen-
ter and surround speakers.
Line-Level Outputs
The line-level audio outputs can be
connected to external power ampli-
fi
ers and powered subwoofers. For
example, if you choose the surround
back speaker outputs to power your
surround back speakers, you could
use an external ampli
fi
er to power
side-axis speakers, and a second
power ampli
fi
er to power Zone 2
speakers.
